Lubrication Service
Service Schedule A
KEY
RED - Technician advises urgent repair needed
AMBER - Technician advises advisory item
GREEN - Technician advises satisfactory at the time of inspection
Initial Checks | RED |
AMBER |
GREEN |
---|---|---|---|
All lights/lenses |
|||
Check horn |
|||
Washers/wipers |
|||
Dashboard warning lights |
|||
Lubricate locks and hinges |
|||
Your Cambelt is due at ………… Miles ……………… Years |
|||
Under Bonnet |
|
|
|
Check all fluid levels |
|||
Check antifreeze consistency |
|||
Brake fluid moisture content |
|||
Check auxiliary belts (if visible) |
|||
Check battery condition |
|||
Check radiator, cap, coolant hoses |
|||
Has Cambelt been changed as per manufacturer’s recommended intervals? |
|||
Half raised |
|
|
|
Check tyres and pressures |
|||
Check wheel bearings |
|||
Visual check of brakes (not removing drums or wheels) |
|||
Check steering, suspension, joints, bushes, springs & gaiters |
|||
Under vehicle |
|
|
|
Oil & filter change |
N | N/A | Y |
Check for any fluid leaks |
|||
Check exhaust condition/mounts |
|||
Final Checks |
|
|
|
Reset service light (if possible) |
N | N/A | Y |
Stamp service book |
N | N/A | Y |
Road test |
N | N/A | Y |
Tyre pressures |
|
|
|
The minimum legal limit for your tyre tread depth is 1.6mm. We advise that you replace your tyres at 2-3mm as anything less than this will greatly reduce your braking efficiency and grip in wet weather. |